MG995 Servo with metal gear can rotate approximately 180 degrees. The servo receives the PWM Signal from the Microcontroller like Arduino and processes it to rotate in the specified direction. The stall torque of the servo is 8.5 Kgf.cm at 4.8V.
- Operating voltage: 4.8V to 7.2V
- Operating temperature: -30 to 60°C
- Gear Type: Metal
- Cable length: 30mm
- Weight: 55 g
- Dimension: 40.7 x 19.7 x 42.9 mm approx.
- Stall torque: 8.5 kgf·cm (4.8 V ), 10 kgf·cm (6 V)
Red – Vcc
Brown – GND
Orange – Signal